Printability

What does this model's surface actually measure like?

Load one local model and get evidence -- wall thickness, overhangs, disconnected islands, and build-volume fit -- for you to weigh against your slicer, material, and printer. This never predicts whether your model will print.

Step 01

Choose a model and parameters

Select one supported file and review the assessment parameters below; sensible defaults are already filled in. If the source uses a different frame, adjust its Expert settings first.

ModelChoose a modelSTL, OBJ, glTF, GLB, or 3MF, up to 32 MiB

Expert settings

Change these only when the source uses a different unit or up-axis. The selected values are recorded with the assessment.

Source unitSource up-axis

Choose a local model file.

Assessment parameters

Thin-wall thresholdBelow this probed thickness, a location is reported (mm)

Overhang angleDegrees from vertical above which a face is flagged (0-90)

Build direction

X axisY axisZ axis (default)Custom direction

Check against a build volume

These are adjustable, arbitrary inputs -- not a certification against any specific printer, material, or slicer profile.

Choose a source file and valid parameters

Local boundary: the source file and its geometry stay inside this browser's dedicated inspection worker; only the structured report leaves the worker, and nothing is uploaded.